Skip to content
Open 24 hours, 7 days a week
Red Wrench Company logo
Manufactured home and propane tank on a juniper-dotted lot in Edgewood under a wide sky

Heating and Cooling in Edgewood, NM

Heat comes first at 6,700 feet. We plan the 45-minute drive around that and tell you the real timing.

Red Wrench serves Edgewood, about 45 minutes from our Paradise Blvd base along I-40. Heating and cooling Edgewood homes is mostly a heating job at 6,700 feet, and the common assumption that everyone here burns propane does not match the numbers. Most homes are on utility gas, with a real minority on tank propane, wood or electric heat.

Santa Fe County Town Limits and the State Road 344 Permit Order

Check the local step first. Edgewood is an incorporated town in southern Santa Fe County, and annexations have carried its limits past the county line. Town zoning rules send development permit applications to the Planning and Zoning administrator for review and signature before a State permit application goes to the Construction Industries Division. Town offices are at 171 State Road 344.

Equipment swaps may not need that zoning step, so ask the town what applies to your job. For the mechanical side, the state says a licensed contractor pulls the furnace replacement permit before the work. Any bid you take should state who pulls it, and ours does.

The town is also larger than it looks. Census records show about 57 square miles of land for roughly 6,200 residents. A call on the far side of the limits can add real minutes beyond the drive quoted above.

Which Fuel Runs an Edgewood Furnace?

Census estimates for 2020-2024 break down occupied homes like this:

Heating fuelShare of homes
Utility gas58%
Tank propane16%
Wood13%
Electricity10%

Margins are wide on these estimates, so treat them as a shape and not a count. They still change how we prepare. Ask what you have before pricing a heat pump, because the savings case differs for each fuel.

Housing tells the rest. The median home dates to 1997, about 35% of homes went up in the 1990s, and roughly 24% are manufactured. A 1990s furnace can be 30 years old by now, and a manufactured home needs a furnace built for that use.

Technician checking a gas furnace burner compartment in an Edgewood utility closet
Burner and venting checks matter more at 6,700 feet, where the manufacturer's high-altitude instructions apply.

Wind, Spring Snow and What to Book Ahead

Plan for weather that can arrive late. An observer near Edgewood logged 13 inches on April 5, 2025, among the largest one-day snow totals in the National Weather Service's Albuquerque summary for that year. Wind matters too. In April 2011, Santa Fe County reported gusts knocking down transmission poles and cutting power around Edgewood and Stanley.

The electric provider here is Central New Mexico Electric Co-op, so check with them during an outage before you assume the furnace failed. A gas furnace still needs power for its blower and controls.

Book these before the season turns:

Wind-bent junipers and a utility line along a rural road near Edgewood
Spring wind can reach the power lines here, and a dead furnace may be a power problem.

Heating and Cooling Edgewood on a 45-Minute Drive

We answer the phone 24 hours a day at (209) 563-1270, but we will not promise a quick arrival over this distance. We tell you what the schedule and the road allow, and you decide. Planned visits are where this drive works best, and the free written estimate comes before work starts either way.

Evaporative cooler with its side panel off for spring startup at an Edgewood home
Spring startup is a planned job, and it suits a longer drive better than an urgent call.

What customers say about Red Wrench

From our Google reviews. Neither reviewer names Edgewood.

“Had a entirely new unit installed new furnace new tubing all the works . Excellent job great communication even loaned me 3 window units to use while my ac was down. And installed a new thermostat for me . Highly recommend . A+++”
John B. on Google, about 2 years ago
“Responded quickly and professionally to a furnace failure in a high demand time period. Job completed the same day and was reasonably priced. Definitely recommend. Judith”
Judith W. on Google, about a year ago

Edgewood heating and cooling questions

Does everyone in Edgewood heat with propane?

No. Census estimates show about 58% of occupied homes on utility gas and about 16% on tank propane, with wood and electricity making up much of the rest. Your own lot may differ from your neighbor's. Check the gas meter or tank before you call, and we will prepare for that fuel.

How quickly can you get to Edgewood on a no-heat call?

We cannot promise a fast arrival. The drive alone runs about 45 minutes from Paradise Blvd in normal conditions, and storms on I-40 can stretch it. Call anyway, because the phone is answered around the clock. We will give you honest timing and safe steps to take while you wait.

Do I need a permit to replace a furnace in Edgewood?

Yes, a permit is required. The state Construction Industries Division says a licensed contractor must pull it before the work is done and inspected. Town zoning review applies to development, so ask Edgewood's Planning and Zoning office whether your project needs that step too. Your quote should name who handles each piece.

Our Albuquerque base

Red Wrench Company

5635 Paradise Blvd NW
Albuquerque, NM 87114

(209) 563-1270

Open 24 hours, 7 days a week

Get directions

Need heating or cooling help in Edgewood?

Call any hour. You get a straight answer, a free written estimate and the price before the work starts.

Red Wrench Company, 5635 Paradise Blvd NW, Albuquerque, NM 87114, (209) 563-1270

Tap to Call (209) 563-1270